Our Dome Permanent Formwork system is a solution that simplifies the creation of sloped surfaces and easily allows the ground height to be stepped. The elevated floor technology allows rapid construction of sloped surfaces while requiring less soil, sand, gravel or concrete. This uses numerous dome permanent formwork modules of various heights that act as a structure to build the sloped surface and achieve the desired ground step.
100% Manufactured from Recycled Material.
Less concrete, less carbon footprint.
Economical in shipping and storage space, very fast production.
Inspectable area after production.
Very High Mechanical Strength.
Dome permanent formworks are used to provide the required ground height and slope in landscape areas. The system eliminates unnecessary fill costs in the field, and provides an area that can be used and inspected after production for the necessary irrigation and electrical installations. This area can be easily accessed by leaving a manhole or intervention cover.
In addition, thanks to the useful void that will be created under the ground, benefits such as irrigation water storage and rainwater harvesting are provided, which are very beneficial to the environment and will bring additional space economy to the project.
Moreover, in landscape areas to be installed on buildings, unnecessary and extra load on the structure under the landscape area will be avoided. Thus, savings in concrete and steel will be achieved in building statics and cost.
Advantages
Offers speed, simplicity and cost performance in construction to the stakeholders.
Inspectable subsurface void after production.
Ground elevation without the need for fill material.
Since the system consisting of columns and domes has high load-carrying capacity, vehicles and heavy vehicles can pass over it.
Can be used as a parking lot or green area above the tank.
Since the formworks can be stacked on top of each other, less storage space is required at the construction site.
Saves time with 80% easier and faster application compared to traditional systems.
Thanks to many columns and domes, the height can be adjusted up to 3 meters, can be used for ramps, stairs or surfaces of different levels.
Fast installation: 200 m2 man/hour.
Transportation and Storage
Much lighter compared to traditional fill materials such as gravel and soil or polystyrene (EPS).
1 truck = 25 m³ soil or gravel
1 truck = 85 m³ EPS (polystyrene)
1 truck = 22 m³ aerated concrete
1 truck = 1100 m³ Dome Permanent Formwork carries.
Since the formworks can be stacked on top of each other, less storage space is required at the construction site.